German original the UV150 energy meter UV-INT150 energy analyzer Germany UV150 UV energy meter 

 (UV the-Integrator150 energy meter Origin: Germany Original UV150 energy meter) 

 Germany UV150 UV energy meter is used to measure the UV energy exposure device an instrument, the UV150 meter main sensor on the back of the measuring instrument, measuring range of 250 to 410 nm, the measurement can be displayed directly in the UV energy meter positive on the display read out (unit: mJ / square cm), the power of the UV energy of the 3.6-volt lithium battery, the battery due to the use of a special energy saving line, the batteries last for about 10,000 hours. 

 German the UV150 energy meter data: UV-INT150 energy meter 

 (UV-integrator150) 

 Size: diameter 90 mm 12 mm 

 Weight: about 150g applicable equipment: UV UV drying machine, exposure machine 

 Measuring range 0-5000mW / cm2 

 Energy: the LCD 0-999999mj/cm2 

 Power: Lithium battery 3.6V of UV 

 Measuring range: 250-410nm (spectrum wavelength) 

 Power consumption: about 10,000 hours (Lithiwn lithium battery) 

 Operating Temperature (° C): 0 ~ 70 ℃ The UV energy meter on a conveyor belt temperature 110 ° C over 10 seconds 

 German original of UV-the INT150 UV energy dollars! German original UV150 energy meter. 

 UV-150 energy meter: Use the / operator a. Open the ON switch, the LCD (display) is displayed as zero. and b. UV energy meter placed in the exposure of UV light source near its back at the light source (UV energy of the energy sensor on the back). 

 (c) Until the display of the UV energy of measurements, such as 800 mJ / square cm. (800mj/cm2) 

 (d) Will display the value of the record or as a quality control experimental parameters, turn off the UV energy meter switch (OFF).